Filter
Top Products
6-11
Cisco ASDM User Guide
OL-16647-01
Chapter 6 Configuring Basic Device Settings
System Image/Configuration
Fields
• Boot Order—Displays the order in which binary image files will be used to boot.
• Boot Image Location—Displays the physical location and path of the boot file.
• Boot Configuration File Path—Displays the location of the configuration file.
• Add—Lets you add a flash or TFTP boot image entry to be used in the boot process.
• Edit—Lets you edit a flash or TFTP boot image entry.
• Delete—Deletes the selected flash or TFTP boot image entry.
• Move Up—Moves the selected flash or TFTP boot image entry up in the boot order.
• Move Down—Moves the selected flash or TFTP boot image entry down in the boot order.
• Browse Flash—Lets you specify the location of a boot image or configuration file.
ASDM Image Configuration
• ASDM Image File Path—Displays the location of the configuration file the device will use at
startup.
• Browse Flash—Lets you specify the location of a boot image or configuration file.
Modes
The following table shows the modes in which this feature is available:
Add Boot Image
To add a boot image entry to the boot order list, click Add in the Boot Image/Configuration pane.
You can select a Flash or TFTP image to add a boot image to the boot order list.
Either type the path of the image, or click Browse Flash to specify the image location. You must type
the path of the image location if you are using TFTP.
Fields
• Flash Image—Select to add a boot image located in the flash file system.
–
Path—Specify the path of the boot image in the flash file system.
• TFTP Image—Select to add a boot image located on a TFTP server.
–
[Path]—Enter the path on the TFTP server of the boot image file, including the IP address of
the server.
• OK—Accepts changes and returns to the previous pane.
• Cancel—Discards changes and returns to the previous pane.
• Help—Provides more information.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • •— •