16-11
Cisco ASDM User Guide
OL-16647-01
Chapter 16 Configuring Management Access
Configuring SNMP
Download Cisco MIBs from the following location:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
.
Download Cisco OIDs from the following location:
ftp://ftp.cisco.com/pub/mibs/oid/oid.tar.gz.
The following table describes the SNMP MIB support that the security appliance provides:
MIB or Trap Support Description of Security Appliance Support
SNMP core traps The security appliance sends the following SNMP core traps:
• authentication—An SNMP request fails because the NMS did not authenticate with
the correct community string.
• linkup—An interface has transitioned to the “up” state.
• linkdown—An interface is down, for example, if you removed the nameif
command.
• coldstart—The adaptive security appliance is running after a reload.
IF-MIB Browsing of the following tables:
• ifXTable
The following objects are supported:
IF-MIB::ifName.1 = Ge7/0
IF-MIB::ifInMulticastPkts.1 = Counter32: 0
IF-MIB::ifInBroadcastPkts.1 = Counter32: 0
IF-MIB::ifOutMulticastPkts.1 = Counter32: 0
IF-MIB::ifOutBroadcastPkts.1 = Counter32: 0
IF-MIB::ifHCInOctets.1 = Counter64: 231678
IF-MIB::ifHCInUcastPkts.1 = Counter64: 963
IF-MIB::ifHCInMulticastPkts.1 = Counter64: 0
IF-MIB::ifHCInBroadcastPkts.1 = Counter64: 0
IF-MIB::ifHCOutOctets.1 = Counter64: 27251
IF-MIB::ifHCOutUcastPkts.1 = Counter64: 325
IF-MIB::ifHCOutMulticastPkts.1 = Counter64: 0
IF-MIB::ifHCOutBroadcastPkts.1 = Counter64: 0
IF-MIB::ifLinkUpDownTrapEnable.1 = enabled(1)
IF-MIB::ifHighSpeed.1 = Gauge32: 10000 (supports 10GE interfaces)
IF-MIB::ifPromiscuousMode.1 = false(2)
IF-MIB::ifConnectorPresent.1 = true(1)
IF-MIB::ifAlias.1 =
IF-MIB::ifCounterDiscontinuityTime.1 = Timeticks: (0) 0:00:00.00