Filter
Top Products
24-31
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Service Policy Field Descriptions
For More Information
Inspect Map Field Descriptions, page 24-59
Inspect command pages for each protocol in the Cisco Security Appliance Command Reference.
Select DCERPC Map
The Select DCERPC Map dialog box lets you select or create a new DCERPC map. A DCERPC map
lets you change the configuration values used for DCERPC application inspection. The Select
DCERPC Map table provides a list of previously configured maps that you can select for application
inspection.
Fields
• Use the default DCERPC inspection map—Specifies to use the default DCERPC map.
• Select a DCERPC map for fine control over inspection—Lets you select a defined application
inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
Modes
The following table shows the modes in which this feature is available:
Select DNS Map
The Select DNS Map dialog box lets you select or create a new DNS map. A DNS map lets you change
the configuration values used for DNS application inspection. The Select DNS Map table provides a list
of previously configured maps that you can select for application inspection.
Fields
• Use the default DNS inspection map—Specifies to use the default DNS map.
• Select a DNS map for fine control over inspection—Lets you select a defined application
inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—