Filter
Top Products
17-18
Cisco ASDM User Guide
OL-16647-01
Chapter 17 Configuring Logging
SMTP
SMTP
The SMTP pane allows you to configure the remote SMTP server IP address to which e-mail alerts and
notifications are sent in response to specific events. To access this pane, choose Configuration > Device
Setup > Logging > SMTP.
To configure the remote SMTP server, perform the following steps:
Step 1 Enter the IP address of the primary SMTP server.
Step 2 (Optional) Enter the IP address of the standby SMTP server, and click Apply.
Modes
The following table shows the modes in which this feature is available:
Using NetFlow
The NetFlow pane lets you enable the transmission of data about a flow of packets. To access this pane,
choose Configuration > Device Management > Logging > NetFlow.
To use NetFlow, perform the following steps:
Step 1 Specify the template timeout rate, which is the interval (in minutes) at which template records are sent
to all configured collectors. The default value is 30 minutes.
Step 2 To delay the export of flow-creation events and process a single flow-teardown event instead of a
flow-creation event and a flow-teardown event, check the Delay export of flow creation events for
short-lived flows check box, and then enter the number of seconds for the delay in the Delay By field.
Step 3 Specify the collector(s) to which NetFlow packets will be sent. You can configure a maximum of five
collectors. To configure a collector, click Add to display the Add Collector dialog box, and perform the
following steps:
a. Enter the IP address or hostname and the UDP port number in the associated fields.
b. Choose the interface to which NetFlow packets will be sent from the drop-down list.
Note IP address and hostname assignments should be unique throughout the NetFlow configuration.
Step 4 To configure more collectors, repeat Step 2 for each additional collector, and click OK.
Step 5 To change collector configuration details, select a collector and click Edit. To remove a configured
collector, select it and click Delete.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—