Filter
Top Products
32-9
Cisco ASDM User Guide
OL-16647-01
Chapter 32 VPN
VPN Wizard
• Authenticate using an AAA server group—Click to use an external server group for remote user
authentication.
• AAA Server Group Name—Select a AAA server group configured previously.
• New ...—Click to configure a new AAA server group.
Modes
The following table shows the modes in which this feature is available:
New Authentication Server Group
User the New Authentication Server Group panel to define one or more new AAA servers.
Fields
To configure a new AAA server group that contains just one server, provide the following information:
• Server Group Name—Type a name for the server group. You associate this name with users whom
you want to authenticate using this server.
• Authentication Protocol—Select the authentication protocol the server uses. Options include
TACACS+, RADIUS, SDI, NT, and Kerberos.
• Server IP Address—Type the IP address for the AAA server.
• Interface—Select the security appliance interface on which the AAA server resides.
• Server Secret Key—Type a case-sensitive, alphanumeric keyword of up to 127 characters. The
server and security appliance use the key to encrypt data that travels between them. The key must
be the same on both the security appliance and server. You can use special characters, but not spaces.
• Confirm Server Secret Key—Type the secret key again.
To add more servers to this new group, or to change other AAA server settings, go to Configuration >
Features > Properties > AAA.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• — • ——