Filter
Top Products
29-13
Cisco ASDM User Guide
OL-16647-01
Chapter 29 Configuring Trend Micro Content Security
CSC SSM Setup
Fields
• IP Address—Sets the address of a host or network you want to add to the Selected Hosts/Network
list.
• Mask—Sets the netmask for the host or network you specified in the IP Address field.
To allow all hosts and networks, enter 0.0.0.0 in the IP Address field and choose 0.0.0.0 from the
Mask list.
• Selected Hosts/Networks—Displays the hosts or networks trusted for management access to the
CSC SSM. ASDM requires that you configure at least one host or network. You can configure a
maximum of eight hosts or networks.
To remove a host or network from the list, choose its entry in the list and click Delete.
• Add—Adds the host or network you specified in the IP Address field to the Selected Hosts/Networks
list.
• Delete—Removes the host or network selected in the Selected Hosts/Networks list.
Modes
The following table shows the modes in which this feature is available:
For More Information
Managing the CSC SSM, page 29-2
Password
The Password pane lets you change the password required for management access to the CSC SSM. The
CSC SSM has a password that is maintained separately from the ASDM password. You can configure
them to be identical; however, changing the CSC SSM password does not affect the ASDM password.
If ASDM is connected to the CSC SSM and you change the CSC SSM password, the connection to the
CSC SSM is dropped. As a result, ASDM displays a confirmation dialog box that you must respond to
before the password is changed.
Tip Whenever the connection to the CSC SSM is dropped, you can reestablish it. To do so, click the
Connection to Device icon on the status bar to display the Connection to Device dialog box, and then
click Reconnect. ASDM prompts you for the CSC SSM password, which is the new password that you
have defined.
Passwords must be 5 - 32 characters long.
Passwords appears as asterisks when you type them.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •
1
1. In multiple-context mode, the Management Access Host/Networks pane is
available only in the admin context.
—