Filter
Top Products
333
15.5 Descriptor Register in RAM
[bits 5, 4] DCS1, DCS0: Transfer destination address update mode
These bits specify the mode in which the transfer source or destination address is updated
each time DMA transfer is performed.
Table 15.5-1 lists the available combinations of these bits.
The unit in which an address is incremented or decremented in address update mode varies
depending on the specified transfer data size as shown below.
[bits 3,2] WS1, WS0
These bits specify the size of data to be transferred.
Table 15.5-1 Specification of Transfer Source or Destination Address Update Modes
SCS1 SCS0 DCS1 DCS0 Transfer source
address
Transfer destination
address
0 0 0 0 Increment Increment
0 0 0 1 Increment Decrement
0 0 1 0 Increment Do not update
0 1 0 0 Decrement Increment
0 1 0 1 Decrement Decrement
0 1 1 0 Decrement Do not update
1 0 0 0 Do not update Increment
1 0 0 1 Do not update Decrement
1 0 1 0 Do not update Do not update
Other Reserved
Table 15.5-2 Address Increment/Decrement Unit
Transfer data size Address increment/
decrement unit
byte (8bit) plus or minus 1 byte
halfword (16bit) plus or minus 2 byte
word (32bit) plus or minus 4 byte
Table 15.5-3 Specification of Transfer Data Size
WS1 WS0 Transfer data size
00byte
01halfword
10word
11Reserved