Filter
Top Products
118 CHAPTER 6: CONFIGURING AND MANAGING IP INTERFACES AND SERVICES
To display the Telnet server sessions on a WX switch, type the following
command:
WX1200# display sessions admin
Tty Username Time (s) Type
------- -------------------- -------- ----
tty0 3644 Console
tty2 tech 6 Telnet
tty3 sshadmin 381 SSH
3 admin sessions
To clear all Telnet server sessions, type the following command:
WX1200# clear sessions telnet
This will terminate manager sessions,
do you wish to continue? (y|n) [n]y
Cleared telnet session on tty2
(To manage Telnet client sessions, see “Logging In to a Remote Device”
on page 132.)
Managing HTTPS Enabling HTTPS
HTTPS is disabled by default. To enable HTTPS, use the following
command:
set ip https server {enable | disable}
CAUTION: If you disable the HTTPS server, Web View access to the
switch is also disabled.
Displaying HTTPS Information
To display HTTPS service information, use the following command:
display ip https
To display information for a WX switch’s HTTPS server, type the following
command:
WX1200> display ip https
HTTPS is enabled
HTTPS is set to use port 443
Last 10 Connections:
IP Address Last Connected Time Ago (s)
------------ ----------------------- ------------
10.10.10.56 2003/05/09 15:51:26 pst 349