3Com WX2200 3CRWX220095A Switch User Manual


 
Assigning Authorization Attributes 491
start-date Date and time at which
the user becomes eligible
to access the network.
MSS does not
authenticate the user
unless the attempt to
access the network occurs
at or after the specified
date and time, but before
the end-date (if specified).
Date and time, in the following
format:
YY/MM/DD-HH:MM
You can use start-date alone or with
end-date. You also can use
start-date, end-date, or both in
conjunction with time-of-day.
time-of-day
(network access
mode only)
Day(s) and time(s)
during which the user
is permitted to log into
the network.
After authorization,
the user’s session can
last until either the
Time-Of-Day range or
the Session-Timeout
duration (if set) expires,
whichever is shorter.
One of the following:
never — Access is always denied.
any — Access is always allowed.
al — Access is always allowed.
One or more ranges of values that
consist of one of the following day
designations (required), and a time
range in hhmm-hhmm 4-digit
24-hour format (optional):
mo — Monday
tu — Tuesday
we — Wednesday
th — Thursday
fr — Friday
sa — Saturday
su — Sunday
wk — Any day between Monday
and Friday
Separate values or a series of ranges
(except time ranges) with commas (,)
or a vertical bar (|). Do not use spaces.
The maximum number of characters is 253.
For example, to allow access only on
Tuesdays and Thursdays between
10 a.m. and 4 p.m., specify the
following:
time-of-day tu1000-1600,th1000-1600
To allow access only on weekdays
between 9 a.m and 5 p.m., and on
Saturdays from 10 p.m. until 2 a.m.,
specify the following:
time-of-day wk0900-1700,sa2200-0200
Note: You can use time-of-day in
conjunction with start-date,
end-date, or both.
Table 43 Authentication Attributes for Local Users (continued)
Attribute Description Valid Value(s)