Open as PDF
Web Quick Start (WXR100, WX1200 and WX2200 Only) 43
Here is an example:
8 Review the configuration settings, then click Finish to save the changes
or click Back to change settings. If you want to quit for now and start
over later, click Cancel.
If you click Finish, the wizard saves the configuration settings into the
switch’s configuration file. If the switch is rebooted, the configuration
settings are restored when the reboot is finished.
The switch is ready for operation. You do not need to restart the switch.
CAUTION: On a WXR100, do not press the factory reset switch for
more than four seconds! On a WXR100 that is fully booted, the factory
reset switch erases the configuration if held for five seconds or more. If
you do accidentally erase the configuration, you can use the Web Quick
Start to reconfigure the switch.