3Com WX2200 3CRWX220095A Switch User Manual


 
Displaying MAP Information 263
(For information about the fields in the output, see the Wireless LAN
Switch and Controller Command Reference.)
To display statistics counters and other information for individual user
sessions, use the display sessions network command. (For information,
see Chapter 25, “Managing Sessions,” on page 557.)
Displaying VLAN Profile Information
To display the contents of the VLAN profiles configured on the WX
switch, use the following command:
display vlan-profile [profile-name]
The command lists the names and tags for each VLAN in the VLAN
profile, as well as the MAPs to which the VLAN profile has been applied.
To display the contents of VLAN profile locals type the following
command:
WX# display vlan-profile locals
vlan-profile: locals
Vlan Name Tag
--------- ---
blue none
red 45
ap numbers: 67
(For information about the fields in the output, see the Wireless LAN
Switch and Controller Command Reference.)
Displaying the ARP Table for a MAP
To display the ARP table for a specified MAP, use the following
command:
display ap arp apnumber
The following command displays ARP entries for AP 7:
WX# display ap arp 7
AP 7:
Host HW Address VLAN State Type
------------------- ----------------- ---- -------- -------
10.5.4.51 00:0b:0e:00:04:0c 1 EXPIRED DYNAMIC
10.5.4.53 00:0b:0e:02:76:f7 1 RESOLVED LOCAL