3Com WX2200 3CRWX220095A Switch User Manual


 
160 CHAPTER 8: CONFIGURING AND MANAGING MOBILITY DOMAIN ROAMING
Displaying Roaming
VLANs and Their
Affinities
The command display roaming vlan displays all VLANs in the Mobility
Domain, the WX switches servicing the VLANs, and their tunnel affinity
values configured on each switch for the VLANs.
The member WX switch that offers the requested VLAN reports the
affinity number. If multiple WX switches have native attachments to the
VLAN, the affinity values they advertise are a way to attract tunneled
traffic to a particular WX switch for that VLAN. A higher value represents
preferred connection to the VLAN. (For more information, see “Changing
Tunneling Affinity” on page 93.)
To display roaming VLANs, type the following command:
WX1200# display roaming vlan
VLAN WX Affinity
---------------- --------------- --------
vlan-eng 192.168.12.7 5
vlan-fin 192.168.15.5 5
vlan-pm 192.168.15.5 5
vlan-wep 192.168.12.7 5
vlan-wep 192.168.15.5 5
(For more information about this command and the fields in the output,
see the Wireless LAN Switch and Controller Command Reference.)
Displaying Tunnel
Information
The command display tunnel displays the tunnels that the WX switch is
hosting to distribute to a locally attached VLAN. To display tunnel
information, type the following command:
WX1200# display tunnel
VLAN Local Address Remote Address State Port LVID RVID
---------------- --------------- --------------- ------- ----- ---- ---
vlan-eng 192.168.12.7 192.168.15.5 UP 1024 130 4103
vlan-eng 192.168.12.7 192.168.14.6 DORMANT 1026 130 4097
vlan-pm 192.168.12.7 192.168.15.5 UP 1024 4096 160
(For more information about this command and the fields in the output,
see the Wireless LAN Switch and Controller Command Reference.)