3Com WX2200 3CRWX220095A Switch User Manual


 
Configuring SNMP 147
RFDetectInterferingRogueDisappearTraps—Generated when an
interfering device is no longer detected.
RFDetectSpoofedMacAPTraps—Generated when MSS detects a
wireless packet with the source MAC address of a 3Com MAP, but
without the spoofed MAP’s signature (fingerprint).
RFDetectSpoofedSsidAPTraps—Generated when MSS detects
beacon frames for a valid SSID, but sent by a rogue AP.
RFDetectUnAuthorizedAPTraps—Generated when MSS detects the
MAC address of an AP that is on the attack list.
RFDetectUnAuthorizedOuiTraps—Generated when a wireless
device that is not on the list of permitted vendors is detected.
RFDetectUnAuthorizedSsidTraps—Generated when an SSID that is
not on the permitted SSID list is detected.
To apply the configuration change to all notification types, specify all.
The drop or send option specifies the action that the SNMP engine takes
with regard to notifications.
Command Examples
The following command changes the action in the default notification
profile from drop to send for all notification types:
WX1200# set snmp notify profile default send all
success: change accepted.
The following commands create notification profile snmpprof_rfdetect,
and change the action to send for all RF detection notification types:
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectAdhocUserTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectClientViaRogueWiredAPTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectDoSTraps
success: change accepted.
WX1200# set snmp notify profile snmpprof_rfdetect send
RFDetectAdhocUserTraps
success: change accepted.