3Com WX2200 3CRWX220095A Switch User Manual


 
608 CHAPTER 27: MANAGING SYSTEM FILES
Creating a
Subdirectory
You can create subdirectories in the user files area of nonvolatile storage.
To create a subdirectory, use the following command:
mkdir [subdirname]
To create a subdirectory called corp2 and display the root directory to
verify the result, type the following commands:
WX1200# mkdir corp2
success: change accepted.
WX1200# dir
===============================================================================
file:
Filename Size Created
file:configuration 17 KB May 21 2004, 18:20:53
file:configuration.txt 379 bytes May 09 2004, 18:55:17
corp2/ 512 bytes May 21 2004, 19:22:09
corp_a/ 512 bytes May 21 2004, 19:15:48
file:dangcfg 13 KB May 16 2004, 18:30:44
dangdir/ 512 bytes May 16 2004, 17:23:44
old/ 512 bytes Sep 23 2003, 21:58:48
Total: 33 Kbytes used, 207822 Kbytes free
===============================================================================
Boot:
Filename Size Created
*boot0:bload 746 KB May 09 2004, 19:02:16
*boot0:WXB03002.Rel 8182 KB May 09 2004, 18:58:16
boot1:WXB03001.Re1 8197 KB May 21 2004, 18:01:02
Boot0: Total: 8928 Kbytes used, 3312 Kbytes free
Boot1: Total: 8197 Kbytes used, 4060 Kbytes free
===============================================================================
temporary files:
Filename Size Created
Total: 0 bytes used, 93537 Kbytes free
Removing a
Subdirectory
To remove a subdirectory from nonvolatile storage, use the following
command:
rmdir [subdirname]
To remove subdirectory corp2, type the following example:
WX1200# rmdir corp2
success: change accepted.