3Com WX2200 3CRWX220095A Switch User Manual


 
488 CHAPTER 21: CONFIGURING AAA FOR NETWORK USERS
Table 43 lists the authorization attributes supported by MSS. (For brief
descriptions of all the RADIUS attributes and 3Com vendor-specific
attributes supported by MSS, as well as the vendor ID and types for 3Com
VSAs configured on a RADIUS server “Supported RADIUS Attributes” on
page 651.)
Table 43 Authentication Attributes for Local Users
Attribute Description Valid Value(s)
acct-interim-inte
rval
Interval in seconds
between accounting
updates, if start-stop
accounting mode is
enabled.
Number between 180 and 3600
seconds, or 0 to disable periodic
accounting updates.
Notes:
The WX switch ignores the
acct-interim-interval value and
issues a log message if the value is
below 60 seconds.
If both a RADIUS server and the
WX switch supply a value for the
acct-interim-interval attribute,
then the value from the WX switch
takes precedence.
encryption-type Type of encryption
required for access by
the client. Clients who
attempt to use an
unauthorized
encryption method are
rejected.
One of the following numbers that
identifies an encryption algorithm:
1 — AES_CCM (Advanced
Encryption Standard using Counter
with CBC-MAC)
2 — Reserved
4 — TKIP (Temporal Key Integrity
Protocol)
8 — WEP_104 (the default)
(Wired-Equivalent Privacy protocol
using 104 bits of key strength)
16 — WEP_40 (Wired-Equivalent
Privacy protocol using 40 bits of
key strength)
32 — NONE (no encryption)
64 — Static WEP
In addition to these values, you can
specify a sum of them for a
combination of allowed encryption
types. For example, to specify
WEP_104 and WEP_40, use 24.