3Com WX2200 3CRWX220095A Switch User Manual


 
Configuring SNMP 149
To configure a notification target for traps from SNMPv3, use the
following command:
set snmp notify target target-num ip-addr[:udp-port-number]
usm trap user username
[profile profile-name]
[security {unsecured | authenticated | encrypted}]
To configure a notification target for informs from SNMPv2c, use the
following command:
set snmp notify target target-num ip-addr[:udp-port-number]
v2c community-string inform
[profile profile-name]
[retries num]
[timeout num]
To configure a notification target for traps from SNMPv2c, use the
following command:
set snmp notify target target-num ip-addr[:udp-port-number]
v2c community-string trap
[profile profile-name]
To configure a notification target for traps from SNMPv1, use the
following command:
set snmp notify target target-num ip-addr[:udp-port-number]
v1 community-string
[profile profile-name]
To clear a notification target, use the following command:
clear snmp notify target target-num
The target-num is an ID for the target. This ID is local to the WX switch
and does not need to correspond to a value on the target itself. You can
specify a number from 1 to 10.
The ip-addr[:udp-port-number] is the IP address of the server. You also
can specify the UDP port number to send notifications to. The default is
162.
Use v1, v2c, or usm to specify the SNMP version.