Filter
Top Products
Managing Other Timers 539
Type the following command to reset the 802.1X quiet period to the
default:
WX1200# clear dot1x quiet-period
success: change accepted.
Setting the 802.1X
Timeout for an
Authorization Server
Use this command to configure the number of seconds before the WX
switch times out a request to a RADIUS authorization server.
set dot1x timeout auth-server seconds
The default is 30 seconds. The range is from 1 to 65,535 seconds.
For example, type the following command to set the authorization server
timeout to 60 seconds:
WX1200# set dot1x timeout auth-server 60
success: dot1x auth-server timeout set to 60.
To reset the 802.1X authorization server timeout to the default, type the
following command:
WX1200# clear dot1x timeout auth-server
success: change accepted.
Setting the 802.1X
Timeout for a Client
Use the following command to set the number of seconds before the WX
switch times out an authentication session with a supplicant (client):
set dot1x timeout supplicant seconds
The default is 30 seconds. The range of time is from 1 to 65,535 seconds.
For example, type the following command to set the number of seconds
for a timeout to 300:
WX1200# set dot1x timeout supplicant 300
success: dot1x supplicant timeout set to 300.
Type the following command to reset the timeout period:
WX1200# clear dot1x timeout supplicant
success: change accepted.