Filter
Top Products
264 CHAPTER 10: CONFIGURING MAP ACCESS POINTS
(For information about the fields in the output, see the Wireless LAN
Switch and Controller Command Reference.)
Displaying the
Forwarding Database
for a MAP
To display the entries in a specified MAP forwarding database, use the
following
command:
display ap fdb apnumber
The following command displays FDB entries for AP 7:
WX# display ap fdb 7
AP 7:
# = System Entry. $ = Authenticate Entry
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports
---- ---- ------------------ ----- -----------------
4095 4095 00:0b:0e:00:ca:c1 # CPU
4095 0 00:0b:0e:00:04:0c eth0
(For information about the fields in the output, see the Wireless LAN
Switch and Controller Command Reference.)
Displaying VLAN
Information for a
MAP
To display information about the VLANs that are either locally switched
by the
specified MAP or tunneled from the MAP to a WX switch, use
the following command:
display ap vlan apnumber
The command lists the VLANs to which the clients associated with the
MAP are members, and whether traffic for each VLAN is locally switched
or tunneled back
to a WX switch.
The following command displays information about the VLANs switched
by AP
7:
WX# display ap vlan 7
AP 7:
VLAN Name Mode Port Tag
---- ---------------- ----- ---------------- ----
1 default local 1 none
2 red local 1 2
radio_1 20
radio_1 21
radio_2 22