Filter
Top Products
APPENDIX B PIN CHARACTERISTICS
A-130 EPSON S1C33L03 PRODUCT PART
CharacteristicPin
No.
Signal name
I/O cell
name
Input Output
Pull-
up/down
Power
supply
Remarks
101 A14/SDBA0 XHBC1T note 3 Type1 VDDE
102 A15/SDBA1 XHBC1T note 3 Type1 VDDE
103 A16 XHBC1T note 3 Type1 VDDE
104 A17 XHBC1T note 3 Type1 VDDE
105 VSS VSS
106 A18 XHBC1T note 3 Type1 VDDE
107 A19 XHBC1T note 3 Type1 VDDE
108 A20 XHBC1T note 3 Type1 VDDE
109 A21 XHBC1T note 3 Type1 VDDE
110 A22 XHBC1T note 3 Type1 VDDE
111 A23 XHBC1T note 3 Type1 VDDE
112 PLLS1 XHIBC CMOS/LVTTL VDDE
113 PLLS0 XHIBC CMOS/LVTTL VDDE
114 VSS VSS
115 PLLC XLLIN VDD note 2
116 VSS VSS
117 DSIO XLBH2P2T CMOS/LVTTL SCHMITT Type2 Pull-up VDD note 2
118 P14/FOSC1/DCLK XLBH2T CMOS/LVTTL SCHMITT Type2 VDD note 2
119 P13/EXCL3/T8UF3/DPCO XLBH2T CMOS/LVTTL SCHMITT Type2 VDD note 2
120 P12/EXCL2/T8UF2/DST2 XLBH2T CMOS/LVTTL SCHMITT Type2 VDD note 2
121 P11/EXCL1/T8UF1/DST1 XLBH2T CMOS/LVTTL SCHMITT Type2 VDD note 2
122 P10/EXCL0/T8UF0/DST0 XLBH2T CMOS/LVTTL SCHMITT Type2 VDD note 2
123 EA10MD1 XHIBCP2 CMOS/LVTTL Pull-up VDDE
124 EA10MD0 XHIBC CMOS/LVTTL VDDE
125 ICEMD XITST1 Pull-down Test pin
126 #EMEMRD XHTB1T Type1 VDDE
127 VDD LVDD
128 OSC4 XLLOT VDD
129 OSC3 XLLIN VDD note 2
130 #NMI XHIBHP2 CMOS/LVTTL SCHMITT Pull-up VDDE
131 #CE9/#CE17/#CE17&18 XHBC1T note 3 Type1 VDDE
132 VDDE HVDD
133 #CE5/#CE15/#CE15&16 XHBC1T note 3 Type1 VDDE
134 N.C.
135 #CE3 XHTB1T Type1 VDDE
136 VSS VSS
137 #CE10EX/#CE9&10EX XHBC1T note 3 Type1 VDDE
138 #CE6/#CE7&8 XHBC1T note 3 Type1 VDDE
139 #CE4/#CE11/#CE11&12 XHBC1T note 3 Type1 VDDE
140 #X2SPD XHIBCCMOS/LVTTL VDDE
141 P03/#SRDY0 XHBH1T CMOS/LVTTL SCHMITT Type1 VDDE
142 P02/#SCLK0 XHBH1T CMOS/LVTTL SCHMITT Type1 VDDE
143 P01/SOUT0 XHBH1T CMOS/LVTTL SCHMITT Type1 VDDE
144 P00/SIN0 XHBH1T CMOS/LVTTL SCHMITT Type1 VDDE
note 1) The voltage applied to this pin must be 0V ≤ VIN ≤ AVDDE.
Note that the input voltage range for the K50 pin differs from other K5x pins.
note 2) The voltage applied to this pin must be 0V ≤ V
IN ≤ VDD.
note 3) This pin is set as an input pin during device testing. Normally it is an output pin.
The following table lists output current characteristics.
Output current (I
OL/IOH)
5.0 V 3.3 V 2.0 V
Type1 3 mA 2 mA 0.6 mA
Type2 –6 mA2 mA
Type3 12 mA 12 mA 4 mA