Filter
Top Products
Scan Settings
3-4
3
Basic Scanning Features
Scan Settings
NOTE
•
Changed scan settings are not saved. For instructions on saving settings, see "User
Preset Keys," on p. 4-17.
•
If [Preview] on the Send Settings screen is set, you can verify the images from the
Preview screen before sending your document. (See "Previewing Originals," on p. 5-17.)
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
2-Sided Original
You can set the machine to automatically turn over two-sided originals that are
placed in the feeder, and scan each side separately.
IMPORTANT
•
The 2-Sided Original mode is available only if the optional Feeder (DADF-L1)
(standard-equipped for Color imageRUNNER C3380i/C2880i) is attached.
•
The 2-Sided Original mode cannot be used with the Document Size Select (Other Size,
Long Strip Original) or 2-Page Separation mode.
•
The 2-Sided Original mode cannot be used when sending a fax document in the Direct
Sending or Manual Sending mode.
•
When you are scanning originals with a horizontal (landscape) orientation, such as
LTRR, make sure to place them horizontally into the feeder. If these originals are placed
vertically, the back sides of these originals are scanned upside down.
NOTE
To cancel this setting, press [2-Sided Original]
➞
[Cancel].