Filter
Top Products
Flow of Sending Operations
1-26
1
Introduction to Sending and Fax Functions
To change the Scan mode settings, select [Option] from the Scan Settings
drop-down list, and adjust the settings. (See "Scan Settings," on p. 3-4.)
IMPORTANT
When the Auto-Color Select mode is set and your originals contain color sections,
the machine scans them in the Full Color mode. However, the machine may scan
the color originals in the Black mode under the following conditions. To avoid this,
set the color mode to 'Full Color'. (See "Full Color," on p. 3-22.)
- If the originals contain few color sections
- If the color sections are located only on the left side (within 3/8" (10 mm) from the
left edge) of the originals when placing the originals into the feeder
- If the originals contain light color densities
- If the color sections of the originals are close to black
NOTE
For instructions on setting the Scan mode, see "Selecting a Scan Mode," on p. 3-2.