Filter
Top Products
Error Messages
13-29
13
Troubleshooting
# 853
Cause 1 The job could not be executed due to a lack of resources when trying to print a
large number of pages.
Remedy Reduce the number of pages to print, or try printing again when no other print
jobs are reserved.
Cause 2 The job could not be executed because it was canceled from the printer driver
while the print data was being sent from the computer to the machine.
Remedy Try printing again.
Cause 3 Use Spooler is set to 'On' and data received from the host could not be spooled
because the spool memory is full.
Remedy Set Use Spooler to 'Off', and try sending again. (See Chapter 3, "Using a TCP/
IP Network," in the Network Guide).
Cause 4 The maximum amount of data that can be received was exceeded when
processing received data.
Remedy Try printing again after all current jobs are completed. If you still cannot print,
check that the data being sent from the computer is not corrupt, and that it has
not exceeded the maximum data size limit.
Cause 5 The number of secured jobs exceeded the maximum limit that can be reserved
at a time.
Remedy Print or erase the secured jobs that are stored in the machine, and then try
printing again.
# 857
Cause Data reception timed out, or the job was canceled at the host.
Remedy Check that the network is functioning properly, and then try printing again.
# 858
Cause There is a problem with the print data sent from an external application.
Remedy Check the settings of the data sent to the machine, make sure they are
compatible with the machine, and try sending the data again.