Filter
Top Products
Selecting the Line for Sending
9-52
9
Customizing Communications Settings
Selecting the Line for Sending
You can register the method for selecting the line to use for sending.
NOTE
•
This mode is available only if the optional Super G3 Multi-Line Fax Board is installed.
•
If you select another line for sending on the Send Settings screen or One-touch Buttons
screen, that setting takes priority.
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [Dual Line Options] under <Fax Settings> ➞ [TX Line
Selection].
2
Select the line to use for sending ➞ press [OK].
<Line 1>:
[Priority TX]: Sends with line 1 if this line is not in use.
[Prohibit TX]: Prohibits sending with line 1. (Line 1 is only used for receiving.)
Documents are always sent with line 2. If line 2 is in use, the
machine waits to send the document.