Filter
Top Products
Error Messages
13-28
13
Troubleshooting
# 851
Cause 1 There is insufficient memory remaining in the system.
Remedy Check the system's available memory, and delete unnecessary documents in
the inboxes. (See "Erasing Received Documents," on p. 6-8, and Chapter 2,
"Introduction to the Mail Box Functions," in the Copying and Mail Box Guide.)
Cause 2 The scanned document cannot be stored because there are more than 1,500
documents or 6,000 pages in the specified inbox.
Remedy Delete unnecessary documents from the specified inbox.
Cause 3 The memory for image data is full.
Remedy Erase unnecessary documents and documents with errors from memory to
increase the amount of available memory. (See "Erasing Received Documents,"
on p. 6-8, and Chapter 2, "Introduction to the Mail Box Functions," in the
Copying and Mail Box Guide.)
# 852
Cause An error occurred because the main power switch was turned OFF while a job
was being processed.
Remedy Check to see if the main power switch is turned ON. Try processing the job
again, if necessary. (See Chapter 1, Before You Start Using This Machine, in
the Reference Guide.)