Filter
Top Products
ECM Transmission
9-43
9
Customizing Communications Settings
ECM Transmission
ECM (Error Correction Mode) reduces the effect of system and line errors on
documents that occur during sending or receiving with another fax machine that
supports ECM. If the other machine does not support ECM, this setting is ignored.
If transmission speed appears to be extremely slow, you may be able to speed up
transmission time by turning ECM 'Off'.
IMPORTANT
•
If you want to transmit using ECM, it is necessary that ECM Transmission be set in both
the destination machine and this machine. This function does not operate unless ECM is
set in both machines.
•
Even when ECM is set, errors can sometimes occur due to a poor telephone line
connection.
•
If there is trouble with the line, it will take more time to send the documents.
NOTE
This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [TX Settings] under <Fax Settings> ➞ [ECM TX].
2
Select [On] or [Off] ➞ press [OK].