Filter
Top Products
Gamma Value for YCbCr Send Jobs
9-32
9
Customizing Communications Settings
Gamma Value for YCbCr Send Jobs
If you are sending to an e-mail or file server destination, you can specify the gamma
value used when converting scanned RGB image data to YCbCr. By setting a
gamma value corresponding to the gamma value at the receiving end, sent image
data can be printed with the appropriate image quality at the receiving end.
NOTE
If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed and
you are sending documents by fax, this setting is disabled.
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [TX Settings] under <Common Settings> ➞ [Gamma Value
for YCbCr Send Jobs].
2
Select the gamma value ([Gamma 1.0], [Gamma 1.4], [Gamma
1.8], or [Gamma 2.2]) ➞ press [OK].