Filter
Top Products
Specifying Report Settings
12-8
12
Printing Communication Reports
2
Select [For Error Only], [On], or [Off].
● If you select [For Error Only] or [On]:
❑
Select [On] or [Off] for <Report with TX Image> ➞ press [OK].
<Report with TX Image>:
● If you select [Off]:
❑
Press [OK].
The Fax TX Report is not printed.
Fax Activity Report
The Fax Activity Report is a printed log that shows the results of send and receive
jobs. The Fax Activity Report can be printed at a specified time or it can be printed
automatically when the number of send and receive transmissions reaches 40. The
send and receive logs can also be printed separately.
A copy of the Fax Activity Report can be printed at any time from the System
Monitor screen. (See "Printing the Fax Activity Report," on p. 8-11.)
NOTE
•
This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.
•
If Job Log Display in System Settings (from the Additional Functions screen) is set to
'Off', [Fax Activity Report] is not displayed.
•
If Job Log Display in System Settings (from the Additional Functions screen) is changed
from 'Off' to 'On', the following settings are switched to 'Off' automatically:
-Auto Print
- Daily Activity Report Time
•
For an example of a Fax Activity Report, see "Fax Activity Report," on p. 14-13.
1
Press (Additional Functions) ➞ [Report Settings] ➞ [Fax]
under <Settings> ➞ [Fax Activity Report].
[On]: Part of the sent document is printed on the Fax TX Report.
[Off]: The contents of the sent document are not printed on the Fax TX
Report.