Filter
Top Products
Number of Retry Attempts
9-13
9
Customizing Communications Settings
Number of Retry Attempts
Retry Times is the mode which automatically resends data when the data cannot
be sent. This occurs because the receiver is busy sending or receiving, or when an
error occurs. This setting determines the number of retry attempts. You can set
from one to five retry attempts, or select '0' to turn the Retry Times mode 'Off'.
NOTE
If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed and
you are sending documents by fax, this setting is disabled.
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [TX Settings] under <Common Settings> ➞ [Retry Times].
2
Press [-] or [+] to set the number of Retry Times ➞ press [OK].
If the number of retry times is set to '0', the machine will not resend the data.