Filter
Top Products
Error Messages
13-31
13
Troubleshooting
# 862
Cause 1 The saddle finisher trays have exceeded their stacking limits. (See Chapter 9,
Appendix, in the Reference Guide.)
Remedy Change the print data or print settings, and try printing again.
Cause 2 A combination of settings which is not supported was set.
Remedy Change the print data or print settings, and try printing again.
Cause 3 Image data or data which is not guaranteed to be compatible was printed.
Remedy Change the print data or print settings, and try printing again.
# 863
Cause An error occurred while processing PDL data or image data.
Remedy Check the settings, and try printing again.
# 864
Cause 1 The external controller or controller board is not attached, or is not functioning
properly.
Remedy Contact your System Manager.
Cause 2 The external controller or controller board cannot be recognized correctly.
Remedy Contact your System Manager.
# 865
Cause The Mail Box function is restricted.
Remedy Contact your System Manager.