Filter
Top Products
Scan Settings
3-19
3
Basic Scanning Features
Zoom by Percentage
You can reduce or enlarge originals by any zoom ratio in 1% increments. Any ratio
from 50% to 200% can be set. The same zoom ratio is used for the horizontal (X)
and vertical (Y) axes.
1
Place your originals and specify the destination ➞ press the
Scan Settings drop-down list ➞ press [Option] ➞ [Copy Ratio].
If necessary, see the screen shots in step 1 and step 2 of "Preset Zoom," on
p. 3-17.
For more information on specifying the destination, see Chapter 2, "Basic
Sending Methods."
2
Press [-] or [+] to set a zoom ratio ➞ press [Done] ➞ [OK].
3
Press (Start).
NOTE
To return the ratio to 100%, press [Direct].
Auto Zoom
You can set the machine to automatically select the appropriate zoom ratio based
on the size of the original and the selected record size. The same zoom ratio is
used for the horizontal (X) and vertical (Y) axes. Any zoom ratio from 50% to 200%
can be set.
IMPORTANT
•
You can only select the Auto setting on the Copy Ratio screen when the resolution is set
to 300 x 300 dpi or 600 x 600 dpi.
•
When using Direct Sending or Manual Sending mode for sending a fax, you cannot
select the Auto setting on the Copy Ratio screen.