Filter
Top Products
Checking/Changing the Status of Send Jobs
8-2
8
Checking/Changing the Send/Receive Status
Checking/Changing the Status of Send Jobs
This section describes how to check/change the status of send jobs. For more
information, see Chapter 5, "Checking Job and Device Status," in the Reference
Guide.
NOTE
•
If Job Log Display in System Settings (from the Additional Functions screen) is set to
'Off', [Log] is not displayed on the System Monitor screen.
•
Send jobs to e-mail, I-fax, and file servers can be checked/changed.
•
If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed, fax
jobs in addition to the above mentioned jobs can be checked/changed.
•
The maximum number of send jobs that are displayed on the Send Status screen is 120.
•
The maximum number of send and receive jobs that are displayed on the Send Log
screen is 100.
Checking Send Job Details
You can check detailed information of any send job, such as the destination and the
date and time the job was specified.
1
Press [System Monitor].