Filter
Top Products
Job Recall
5-38
5
Sending Documents
Job Recall
You can recall the last three addresses, scan settings, and send settings which
have been set, and then send your documents.
IMPORTANT
•
The machine considers any one of the following operations a send job:
- When settings, such as the destination, scan settings, and send settings, are specified,
and the control panel power switch, (Start), or (Reset) is pressed
- When the Auto Clear mode activates after send settings are specified
•
The Standard mode is not stored in Recall memory.
•
Identical send settings are stored only once in Recall memory.
•
If Access Number Management in Restrict the Send Function in System Settings (from
Additional Functions screen) is set to 'On', the Recall mode cannot be used.
•
If a destination type in Restrict New Addresses in Restrict the Send Function in System
Settings (from the Additional Functions screen) is set to 'On', all stored settings in the
Recall mode are erased, regardless of the destination type.
NOTE
The three most recent settings that were stored in memory are not erased even when the
main power is turned OFF.
1
Place your originals ➞ press [Recall].
NOTE
For instructions on placing your originals, see Chapter 2, "Basic Operation," in the
Reference Guide.