Filter
Top Products
Forwarding Settings
11-27
11
System Manager Settings
● If [Fax] is selected as the receive type (The optional Super G3 FAX
Board or Super G3 Multi-Line Fax Board is installed):
❑
Select the Fax Number, Subaddress, or Password drop-down list.
The available forwarding conditions are:
[does not exist] is not an option for <Fax Number>.
[does not exist] and [equals] are the only forwarding conditions that can be
selected for <Subaddress> and <Password>.
❑ Select the forwarding condition ➞ press [Set.] ➞ enter the forwarding criterion
using - (numeric keys).
Details of each item are shown below.
[disregarded]: Disregards the Fax Number information as a forwarding
condition.
[does not exist]: The Subaddress or Password information does not exist
for the received document.
[equals]: Forwards the document if the Fax Number, Subaddress,
or Password information matches all of the characters
entered.
[differs from]: Forwards the document if the Fax Number information
differs from the characters entered.
[begins with]: Forwards the document if the Fax Number information
begins with the characters entered.
[ends with]: Forwards the document if the Fax Number information
ends with the characters entered.
[contains]: Forwards the document if the Fax Number information
contains the characters entered.
[does not contain]: Forwards the document if the Fax Number information
does not contain the characters entered.
[] []:
Press to move the position of the cursor.
[Backspace]: Press to delete the last number entered.
[Space]: Press to insert a space between numbers.
[+]: Use to insert a country code. Press [+] after the country
code, and before the fax number.