Filter
Top Products
Error Messages
13-18
13
Troubleshooting
# 704
Cause An error occurred while reading address information from the Address Book.
Remedy Check the address settings. If the machine still does not operate normally, turn
the main power OFF, and then back ON. (See Chapter 1, Before You Start
Using This Machine, in the Reference Guide.)
# 705
Cause The send operation was interrupted because the size of the image data is larger
than the Maximum Data Size for Sending set in E-mail/I-Fax Settings in
Communications Settings in System Settings (from the Additional Functions
screen).
Remedy Change the Maximum Data Size for Sending setting in E-mail/I-Fax Settings in
Communications Settings in System Settings (from the Additional Functions
screen). Select a lower resolution, or if you are using I-fax, decrease the
number of pages containing images that you are sending each time, so that you
do not exceed the Maximum Data Size for Sending limit.
# 706
Cause The Address Book is being imported or exported from the Remote UI, or it is
being used by another sending component.
Remedy Wait until the Address Book Import/Export function from the Remote UI or the
other sending component is complete, and then try sending again.
# 711
Cause The inbox memory is full.
Remedy Erase the unnecessary documents stored in the inbox. (See "Erasing Received
Documents," on p. 6-8, and Chapter 2, "Introduction to the Mail Box Functions,"
in the Copying and Mail Box Guide.)
# 712
Cause The maximum number of documents is already stored in the inbox.
Remedy Erase the unnecessary documents stored in the inbox. (See "Erasing Received
Documents," on p. 6-8, and Chapter 2, "Introduction to the Mail Box Functions,"
in the Copying and Mail Box Guide.)