Filter
Top Products
Specifying Report Settings
12-7
12
Printing Communication Reports
Enter all four digits of the time (including zeros), using 24-hour notation.
If you make a mistake when entering the time, press (Clear) to clear your entry
➞ enter another four digit number.
If the number of send and receive transmissions exceeds 100 before the
specified time, an Activity Report of the most recent 100 transmissions is printed.
<Send /Receive Separate>:
To print the send and receive logs separately, press [Send/Receive Separate] to
select it.
If it is not necessary to print the send and receive logs separately, do not press
[Send/Receive Separate].
Fax TX Report
The Fax TX Report enables you to check whether documents were sent correctly to
their intended destinations. A Fax TX Report can be printed automatically after the
documents are sent. You can also set the machine to print a Fax TX Report only
when a transmission error occurs, and adjust the Fax TX Report setting to print the
first part of the document as part of the report to remind you of the document's
contents.
NOTE
•
This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.
•
For an example of a Fax TX Report, see "Fax TX Report/Fax Error TX Report," on
p. 14-5.
•
If TX Report in Send under <Settings> in Report Settings (from the Additional Functions
screen) is set to 'For Error Only' or 'On', a Send TX Report is printed with the Fax TX
Report.
1
Press (Additional Functions) ➞ [Report Settings] ➞ [Fax]
under <Settings> ➞ [Fax TX Report].
Examples: 7:05 a.m. ➞ 0705
11:18 p.m. ➞ 2318