Filter
Top Products
Sending Methods
5-3
5
Sending Documents
NOTE
This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.
■ Memory Sending
All of the originals to be sent are first scanned and read into memory, then sent. This
means that you do not need to stay near the machine once the originals have been
scanned.
NOTE
The memory can hold a total of approximately 6,000 pages of sent and received
documents.
■ Direct Sending
The machine sends each page of the document to the destination as it is scanned.
IMPORTANT
•
With Direct Sending mode, you can send a document of two or more pages only when
using the feeder. You can only send one page at a time when you place your original on
the platen glass.
•
You can specify only one destination at a time for Direct Sending mode.
•
Memory Sending is automatically set when using Delayed Send or when multiple
destinations are specified.
•
If an error occurs or you cancel transmission in the Direct Sending mode, you can check
how many pages have been sent to the destination by printing the Fax Activity Report, or
on the Log screen for Fax on the System Monitor screen.
•
If the optional Super G3 Multi-Line Fax Board is installed, you can select which line to
send with.
1
Place your originals ➞ specify the fax destination ➞ press
[Send Settings].
2
Specify each setting ➞ press [Done].