Filter
Top Products
Specifying Destinations Using the New Address Tab
2-18
2
Basic Sending Methods
If you select [Bindery], follow the procedure from step 5 in "Using the Browse Key
(Windows (SMB))," on p. 2-14.
If you select [NDS], follow the steps below.
5
Select the desired NDS tree ➞ press [Down].
To move up one level, press [Up].
6
Select a folder on the specified server in which you want to
log on to ➞ press [Log In].
If no folder is displayed, press [Log In] to log on to the Novell server.
To go down one level, press [Down].
To move up one level, press [Up].
7
Enter your user name and network password.
❑ Specify each setting ➞ press [OK].
[User]:
Press [User] ➞ enter your user name ➞ press [OK].
[Password]:
Press [Password] ➞ enter your network password ➞ press [OK].
After pressing [OK], the password that you entered appears as asterisks
(********) on the Enter Network Password screen.
IMPORTANT
Searching for a destination via an LDAP server is not possible if the time setting of
the server and the time setting of the machine are more than five minutes apart. If
you cannot send even when the user name and password are correct, check the
time settings on the server and the machine.
8
Press [Down] ➞ select the folder to where you want to send
your file ➞ press [OK].
To move up one level, press [Up].
9
Confirm your settings ➞ press [OK].