Filter
Top Products
Adjusting the Alarm and Monitor Volume
9-42
9
Customizing Communications Settings
Adjusting the Alarm and Monitor Volume
You can set the volume for the alarm and monitor tones that this machine sounds
during a fax transmission.
NOTE
•
This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.
•
The alarm tone sounds when sending or receiving is canceled.
•
The monitor tone sounds when it connects to the recipient's fax machine.
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [User Settings] under <Fax Settings> ➞ [Volume Control].
2
Select [ ] or [ ] to set the Alarm Volume and Monitor
Volume ➞ press [OK].
You can set the volume to any level on a scale of 0 to 8.
If you set the volume all the way to the left, the volume is muted and no tone will
sound.