Filter
Top Products
Checking/Changing the Status of Receive and Forwarded Jobs
8-14
8
Checking/Changing the Send/Receive Status
2
Press [Receive] ➞ [Checking RX of I-Fax Jobs].
The screen below is displayed while the machine is checking for the arrival of an
I-fax.
NOTE
To be able to use [Checking RX of I-Fax Jobs], you must first set the POP setting in
E-mail/I-Fax in Network Settings in System Settings (from the Additional Functions
screen) to 'On' so that you can receive documents using POP. (See Chapter 3,
"Using a TCP/IP Network," in the Network Guide.)
Checking the Status of Jobs That Have Been Forwarded
You can check the details of jobs that have been forwarded, depending on the
forwarding settings.
1
Press [System Monitor].
If necessary, see the screen shot in step 1 of "Checking Send Job Details," on
p. 8-2.
2
Press [Receive] ➞ [Forwarding Status].