Filter
Top Products
Forwarding Settings
11-31
11
System Manager Settings
● If you select [Everyday]:
❑
Enter the start time and end time using - (numeric keys) ➞ press [OK].
Enter all four digits of the time (including zeros), using 24-hour notation.
NOTE
If the end time is set earlier than the start time, the received documents will stop
being forwarded at the specified end time on the following day.
For example:
Start time: 22:00, end time: 21:00
The end time refers to 21:00 on the following day.
● If you select [Period Specification]:
❑
Press [Add].
❑ Press the Start Time drop-down list ➞ select a day of the week ([Sun] to [Sat])
at which to start forwarding.
❑ Press [ ] next to the Start Time drop-down list ➞ enter the time at which to
start forwarding.
Enter all four digits of the time (including zeros), using 24-hour notation.
If you press [All Day], the start and end times are automatically set to '00:00'.
The day for the end time is automatically set to the day following the day for
the start time.
❑ Set the end time in the same way as the start time ➞ press [OK].
You can store up to seven different combinations of start and end times.
To change previously stored settings, select the setting that you want to
change ➞ press [Edit].
To erase previously stored settings, select the setting that you want to erase ➞
press [Erase].
NOTE
If the end time is set earlier than the start time and both the start time and the end
time are set for the same day of the week, the received documents will stop being
forwarded at the specified end time on the specified day of the following week.
For example:
Start time: Monday 22:00, end time: Monday 21:00
The end time refers to Monday 21:00 of the following week.
● If you select [Off]:
❑
Press [OK].