Filter
Top Products
Checking/Changing the Status of Send Jobs
8-7
8
Checking/Changing the Send/Receive Status
Resending a Job
You can resend jobs that are canceled due to transmission errors.
IMPORTANT
•
To be able to resend jobs that have been canceled due to a transmission error, you must
first set Erase Failed TX in TX Settings under <Common Settings> in Communications
Settings (from the Additional Functions screen) to 'Off'. (See "Automatic Document
Deletion," on p. 9-10.)
•
You cannot resend fax jobs sent with the Direct Sending or Manual Sending mode, or
sent from computers via the fax driver because the statuses of those jobs are not
displayed.
1
Press [System Monitor] ➞ [Send] ➞ [Status].
If necessary, see the screen shots in step 1 and step 2 of "Changing the
Destination," on p. 8-5.
2
Select the job that you want to resend ➞ press [Details].
3
Select the destination to resend the job to.
● If there is only one destination:
❑
Press [Resend].
● If there are multiple destinations for the same sending method:
❑
Press [Broadcast List].
❑ Select the destination to resend the job to ➞ press [Resend].
NOTE
The job is placed in the send queue if there is another job being sent or waiting to
be processed.