Filter
Top Products
Specifying Destinations Using the New Address Tab
2-4
2
Basic Sending Methods
IMPORTANT
You cannot insert a pause at the beginning of a number.
NOTE
If you enter a pause at the end of the number, the pause is always 10 seconds
long.
● If you press [Option]:
❑
Press [Subaddress] ➞ enter the recipient's subaddress using
- (numeric keys), , and .
❑ Press [Password] ➞ enter the recipient's password using
- (numeric keys), , and .
Press [Space] to insert a space.
Press [Backspace] to delete the last digit entered.
If the recipient did not set a password for the target subaddress, you do not
need to enter a password.
IMPORTANT
If you want to attach a subaddress to your send job, make sure that the recipient's
fax machine supports ITU-T (International Telecommunication Union -
Telecommunication Standardization Sector) standard subaddresses.
NOTE
For instructions on sending documents with a subaddress, see "Sending with a
Subaddress," on p. 7-2.
❑ Select [Line 1], [Line 2], or [Auto] ➞ press [OK].
Details of each item are shown below.
[On-hook]: Press to use tone dialing or to send a fax document manually.
(See "Sending Fax Documents Manually," on p. 1-31, or "Fax
Information Services," on p. 7-8.)
[Line 1]: Standard line
[Line 2]: Additional line
[Auto]: Selects the line according to the settings specified for [TX Line
Selection] in [Dual Line Options] under <Fax Settings> in
Communications Settings (from the Additional Functions screen).
(See "Selecting the Line for Sending," on p. 9-52.)