Filter
Top Products
ECM Reception
9-48
9
Customizing Communications Settings
ECM Reception
You can receive incoming documents using ECM (Error Correction Mode).
ECM is a mode which automatically corrects errors in an image while it is being
received.
IMPORTANT
•
If you want to communicate using ECM, it is necessary that ECM Reception be set in
both the destination machine and this machine. This function does not operate unless
ECM is set in both machines.
•
Even when ECM is set, errors can sometimes occur due to a poor telephone line
connection.
•
If there is trouble with the line, it will take more time to receive the documents.
NOTE
This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [RX Settings] under <Fax Settings> ➞ [ECM RX].
2
Select [On] or [Off] ➞ press [OK].