Filter
Top Products
2 On 1 Log
9-40
9
Customizing Communications Settings
2 On 1 Log
This mode enables you to print two received documents of the same paper size
onto a single sheet of paper.
The 2 On 1 Log mode is available only under the following conditions:
• The same paper drawer must be selected for printing two consecutive pages of
the received document.
• The paper in the selected paper drawer must be large enough for two consecutive
pages to be printed out.
- Example: If the LTR paper drawer is empty, but the 11" x 17" drawer is loaded,
you can print two LTR documents onto a single sheet of 11" x 17" paper.
NOTE
When the 2 On 1 Log mode is set to 'On', documents are printed with a dotted line in the
middle. If the document is received with sender information, the dotted line is not printed
in the area where the sender information is located.
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [RX Settings] under <Common Settings> ➞ [2 On 1 Log].
2
Select [On] or [Off] ➞ press [OK].