Filter
Top Products
Report and List Samples
14-12
14
Appendix
■ DESTINATION ADDRESS
The address of the recipient is printed.
If the send job is sent to a file server (FTP, SMB, IPX, or WebDAV), the path name is
printed on the second line.
If a subaddress is specified for sending a fax, the destination address is printed on the
second line.
■ DESTINATION ID
The name of the recipient is printed.
■ JOB NO.
The four digit number, that is automatically assigned when the document is accepted for
sending or receiving, is printed. Numbers between 0001 and 4999 are for sending, while
numbers between 5001 and 9999 are for receiving.
■ MODE
The type and mode of transmission are printed.
NOTE
•
FTP, SMB, IPX, WebDAV, Inbox, I-Fax, and E-mail can be displayed in the MODE
column.
•
If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed, FAX,
and G3 in addition to the above mentioned mode of transmissions can be displayed in
the MODE column.
■ PGS.
The number of pages that were sent or received successfully is printed.
■ RESULT
"OK," "NG," or "- -," and the transmission time are printed.
If the documents have been received successfully by the recipient, "OK" is printed.
If a sending error occurs, "NG" (No Good) is printed, and the error code is printed on the
second line.
When sending is successful, but it is not confirmed whether the e-mail message or I-fax,
or the file that you sent to an imageWARE Document Manager folder, was actually
delivered, "--" is printed.
Transmission type: Send (TX), Receive (RX)
Mode of transmission: FTP, SMB, IPX, WebDAV, User Inbox (BOX), I-Fax (I-FAX), E-mail
(MAIL), Fax (FAX), G3