Filter
Top Products
Auto Redial
9-45
9
Customizing Communications Settings
Auto Redial
Auto Redial enables the machine to automatically redial the recipient's fax number
if the recipient cannot be reached due to a busy line, or if a sending error occurs.
Auto Redial can be turned 'On' or 'Off'. If you set Auto Redial to 'On', you can set
how many times the machine redials, the redial interval, and whether the document
should be resent due to an error.
NOTE
•
This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.
•
If a sending error occurs when the receiving end answers the call, it may be because of a
misdialed number. To prevent the machine from constantly redialing to the same number
even though it was wrong, the machine will only redial once, regardless of the Redial
Times setting. However, if the receiving end does not answer the call, the machine will
dial the number of times set for the Redial Times setting.
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [TX Settings] under <Fax Settings> ➞ [Auto Redial].
2
Select [On] or [Off].
● If you select [On]:
❑
Press [Option] ➞ specify each setting ➞ press [OK] ➞ [OK].