Filter
Top Products
Communications Settings
11-10
11
System Manager Settings
4
Press [Confirm] ➞ re-enter the password for confirmation
using - (numeric keys) ➞ press [OK] ➞ [OK].
If you do not want to set the Memory RX Inbox with a password, press [OK]
without entering any numbers.
You cannot store a password with only zeros as the number, such as <0000000>.
If you enter a number that begins with zeros, the leading zeros are ignored.
Example: If <02> or <002> is entered, <0000002> is stored.
NOTE
If Use Asterisks to Enter Access No./Passwords in System Settings (from the
Additional Functions screen) is set to 'Off', the password that you entered is not
displayed as asterisks. (See Chapter 6, "System Manager Settings," in the
Reference Guide.)
Storing Received Fax Documents in Memory
You can set the machine to store received fax documents in memory without
printing them. This is referred to as Fax Memory Lock. You can later check the
received documents in the Memory RX Inbox, and print or send them.
1
Press (Additional Functions) ➞ [System Settings] ➞
[Communications Settings] ➞ [Memory RX Inbox Settings] ➞
[Use Fax Memory Lock].
2
Select [On] or [Off] ➞ press [OK].
IMPORTANT
If the message <Fax Memory RX is on.> does not appear, set the Fax Memory
Lock setting on the Memory RX Inbox screen from the Inbox Selection screen of
the Mail Box function to 'On'. (See Chapter 6, "Sending and Receiving Documents
Using the Inboxes," in the Copying and Mail Box Guide.)