Filter
Top Products
Reducing a Received Document
9-37
9
Customizing Communications Settings
Reducing a Received Document
You can set the machine to automatically reduce received documents so that the
whole document is printed within the printable area of the paper.
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [RX Settings] under <Common Settings> ➞ [Receive
Reduction].
2
Select [On] or [Off].
IMPORTANT
•
If you select [Off], the received document is not automatically reduced to fit the size
of the paper. If the size of the received document exceeds the printable area, the
image is divided into equal sections and printed onto separate sheets of paper.
•
Regardless of the settings you set for Receive Reduction, if the area of the image
which exceeds the printable area is less than 1/2" (12 mm), it will not be printed.