Filter
Top Products
Standard Send Settings
9-14
9
Customizing Communications Settings
Standard Send Settings
This mode enables you to change the standard settings for the Send function,
including the scan mode and file format. (See "Selecting a Scan Mode," on p. 3-2,
and "Sending Methods," on p. 5-2.)
NOTE
•
If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed and
you are sending documents by fax, the file format set here is disabled.
•
You can change the file format.
•
If you send documents by fax or I-fax, the file format set here is disabled. However, if
[PDF (Trace)] or [PDF (Compact)] is selected as the file format in the Standard Send
Settings and you are sending documents by fax or I-fax, a message prompting you to
change the file format may appear on the screen. If this happens, change the File Format
setting to anything other than [PDF (Trace)] or [PDF (Compact)].
1
Press (Additional Functions) ➞ [Communications Settings]
➞ [TX Settings] under <Common Settings> ➞ [Edit Standard
Send Settings].
2
Specify each setting ➞ press [OK].
[Scanning Mode]:
Press the Scanning Mode drop-down list ➞ select a scan mode.
You can also select a scan mode that you have already stored. (See "User Preset
Keys," on p. 4-17.)