Filter
Top Products
2-84
SET BPORT_LEC NUM_ELAN_VCCS
SET BPORT_LEC
NUM_ELAN_VCCS
Use the SET BPORT_LEC NUM_ELAN_VCCS command to specify the maximum
number of virtual circuits available to the LAN Emulation Client (LEC).
BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Format
Example
The following command sets the maximum number of virtual circuits available
to the LEC in slot 4, port 1 to 128:
CB5000> set bport_lec 4.1 num_elan_vccs 128
Bridge Port 04.01 parameter set.
Related Commands
SHOW BPORT_LEC CONFIGURATION
SHOW ATM INTERFACE
SET ATM NUM_VCCS
slot.lec Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
option Specifies the maximum number of virtual circuits available to the LEC. You
can choose from 128 to Max VCCs. Where Max VCCs is equal to whatever
is defined using the SET ATM NUM_VCCS command.
set bport_lec
num_elan_vccs
slot.lec
opt
i
on